RAD Data comm BLW-04EX User Manual

Page 28

BLW-04EX

Configuration Tools

Choose a function and click.

Reset

Click “Apply” to reset the BLW-04EX. The reset will be complete when the

power LED stops blinking.

Note:

If you use the Reset button on the rear panel, the BLW-04EX performs a

power reset. If the button is held depressed for over 5 seconds, all the LEDs

will illuminate and the factory settings will be restored.

Allows a remote PC t o configure, m anage, and monit or the BLW- 0 4 E X

using a standard web browser. Check “Enable” and enter the IP address of

the remote host. Click “APPLY.”

Note:

If you speci fy an IP address of 0.0.0.0, any hos t can manage the BLW-

04EX.

Main Menu

Tools

Use th e “Tools ” menu t o back up t he current co nfigu rat io n, rest ore a

previously saved configuration, restore factory sett ings, update firmware,

and reset the BLW-04EX.

MISC Setting