Roland AT900C - Manual (Page 239)

237
Various Other Settings
Various Other Settings
This setting changes the proportional relationship between the
vertical and horizontal dimensions of the image that is output
from the ATELIER to the television or display connected to the
Video Output [Video] jack.
The ATELIER’s display screen has a horizontal/vertical ratio of
16:9. Televisions and displays have screen sizes with a
horizontal/vertical ratio of 4:3 or 16:9 (wide screen).
You can’t change the aspect ratio of the image that is output
from the Video Output [RGB] connector to an external
display or a television.
If you’re viewing images on a television or display connected
to the Video Output [Video] jack, change this setting as
appropriate for the aspect ratio of the television or display
you’ve connected.
1. Touch on the Main screen.
The System screen appears.
2. Touch .
fig.00-38.eps
3. Touch .
The Video screen appears.
4. Touch .
The Video Option screen appears.
5. Touch the Aspect Ratio setting to switch
between “16:9” and “4:3.”
6. Touch .
This setting remains stored in memory even while power is
turned off.
If the image is still not shown correctly even though you have
adjusted the ATELIER’s aspect ratio to match the television or
display you’ve connected, please change the settings of the
connected television or display.
Selecting the Aspect Ratio of the Video
Output
NOTE
Setting Descriptions
16:9
Use this setting if the connected television or
display has a screen aspect ratio of 16:9.
4:3
Use this setting if the connected television or
display has a screen aspect ratio of 4:3.
4:3 Television
Original image
4:3
Aspect Ratio
16:9
16:9 Television
Image is displayed correctly
Image is distorted Image is not completely
visible
NOTE
AT-900_e.book 237 ページ ２００７年９月７日 金曜日 午前８時４３分