Roland AT900C - Manual (Page 212)

210
Various Other Settings
Initial Touch is a function that translates the force used in
playing the keys into a directly proportional amount of volume.
This adjusts the amount of the Initial Touch effect applied.
1. Touch on the Main screen.
The Sound/Keyboard screen appears.
2. Touch either , or .
3. Touch < >< > to display the Initial Touch.
fig.09-03.eps
4. Touch the Initial Touch value (OFF, 1–10).
5. Touch < >< > to edit the value.
6. Touch .
You can set the Bass Pedalboard to play simultaneous multiple
notes or single notes only.
1. Touch on the Main screen.
The Sound/Keyboard screen appears.
2. Touch .
The Pedalboard screen appears.
3. Touch < >< > to display the PedalBass
Mode.
fig.09-04.eps
4. Touch the PedalBass Mode setting to switch
between “MONOPHONIC” and
“POLYPHONIC.”
Each time you touch the PedalBass Mode setting, it will
alternate between “MONOPHONIC” and
“POLYPHONIC.”
5. Touch .
Adjusting the Initial Touch Sensitivity
Upper
To change the initial touch setting of
the Upper part
Lower
To change the initial touch setting of
the Lower part
Setting Descriptions
1–10
Initial Touch is on.
Striking the keys more forcefully will
produce correspondingly louder
sounds.
The change in volume when the keys
are played forcefully increases as the
value is increased.
OFF
Initial Touch is off.
Volume remains constant regardless of
how hard you play.
Changing the Pedalboard Polyphony
Setting Descriptions
MONOPHONIC Only single notes can be played.
POLYPHONIC Multiple notes can be played.
AT-900_e.book 210 ページ ２００７年９月７日 金曜日 午前８時４３分