Roland AT900C - Manual (Page 162)

160
Using the Lower Keyboard Effectively
This setting is used to determine the Solo Split Point (lower limit
of the playable range of the Solo voice) on the Lower
keyboard to any desired position.
1. Touch on the Main screen.
fig.06-08.eps
The Sound/Keyboard screen appears.
fig.VoiceList.eps
2. Touch .
The Split Point screen appears.
fig.06-13.eps
3. Touch < >< > to change the Solo Split
Point.
4. Touch .
Changing the Solo Split Point
Setting
E1–G7
You can also set the split point by pressing the key of
the lower keyboard that you want to be the Solo Split
Point.
fig.06-13-2.eps
1. While touching the Solo Split Point value
(E1–G7 indication) in the Split Point screen,
press the key in the Lower keyboard that
you want to specify as the Solo Split Point.
The Solo Split Point will be set in the Split Point
screen.
AT-900_e.book 160 ページ ２００７年９月７日 金曜日 午前８時４３分