Roland AT900C - Manual (Page 185)

183
Recording/Playing Back What You Play
Recording/Playing Back What You Play
The confirmation message appears.
fig.07-30.eps
If you touch the performance data will not be
deleted, and you will return to the Rec/Play screen.
7. When you touch the performance data
will be deleted.
You can load commercially available SMF music files into the
ATELIER, and record your own performance on top of it.
During recording, the data you’ve loaded will be played
back, while you record your performance.
1. Prepare the SMF music files.
If you’re using SMF music files from USB memory,
connect it to the external memory connector.
If you’re using SMF music files from a floppy disk,
connect the floppy disk drive to the Ext Drive connector,
and insert the floppy disk.
2. Touch on the Main screen.
The Rec/Play screen appears.
3. Touch < > (Utility).
The Utility screen appears.
4. Touch .
The Song Select screen appears.
fig.07-31.eps
5. Touch < >< > to select the desired media.
If you want to play SMF music files from USB memory,
choose “Ext Memory.” If you want to play SMF music
files from floppy disk, choose “Disk.”
6. Touch < >< > to select the SMF music
files that you wish to load into internal
memory.
Layering a New Recording
onto SMF Music Files
AT-900_e.book 183 ページ ２００７年９月７日 金曜日 午前８時４３分