Roland AT900C - Manual (Page 170)

168
Recording/Playing Back What You Play
Playing back all performance data
1. Prepare the song that you want to play back.
If you want to play a song from USB memory, connect it
to the external memory connector.
If you want to play a song from floppy disk, connect the
floppy disk drive to the Ext Drive connector, and insert a
floppy disk into the drive.
2. While holding down the [Song] button, press
the [Play/Stop] button.
fig.01-01.eps
All performance data saved on the USB memory or
floppy disk will be played consecutively.
3. To stop playback, press the [Play/Stop]
button.
fig.07-08.eps
When the Rec/Play screen is displayed, the track button will
light to indicate a track in which a performance has been
recorded. By turning off these track buttons, you can
temporarily silence the sound. This is referred to as “Track
Mute.”
If you want to play back a song from USB memory, connect
your USB memory to the external memory connector before
you continue.
If you want to play back a song from floppy disk, connect your
floppy disk drive to the Ext Drive connector, and insert the
floppy disk.
1. Press the [Song] button.
The Song Select screen appears.
fig.07-31.eps
2. Touch < >< > to select the desired media.
Choose “Favorites” if you want to play back a song from
user memory, choose “Ext Memory” if you want to play
back a song from USB memory, or choose “Disk” if you
want to play back a song from floppy disk.
3. Touch < >< > to select the song that you
wish to play back.
4. Touch to load the song.
Silencing a Specific Track
(Track Mute)
AT-900_e.book 168 ページ ２００７年９月７日 金曜日 午前８時４３分