Roland AT900C - Manual (Page 226)

224
Various Other Settings
2. Touch , Lower>, , Solo>, (Tx MIDI Ch.
Drums/SFX), (Tx MIDI
Ch. Manual Percussion) or
(Tx MIDI Ch. Control).
The Control part transmits Expression pedal data and PC
numbers.
3. Touch < >< > to change the setting.
fig.09-31-a.eps
4. Touch .
MIDI messages for the Solo part will be transmitted only
when the Solo [To Lower] button is ON.
You can adjust the brightness of the display.
1. Touch on the Main screen.
The System screen appears.
2. Touch < >< > to display the Display
Brightness.
fig.09-44.eps
3. Touch the Display Brightness setting.
fig.09-45.eps
4. Touch < >< > to change the setting.
Higher values will make the screen brighter.
5. Touch .
This setting remains stored in memory even while power is
turned off.
Setting
1–16
NOTE
Adjusting the Brightness of the Display
Setting
1–3
AT-900_e.book 224 ページ ２００７年９月７日 金曜日 午前８時４３分