Radio Shack 43-3704 User Manual

Page 68

The

Integrat

ed Answ

ering Device

4. Enter a command within 15 seconds,

each command there after must be
entered within two seconds. You may
select a command from the following
chart:

5. After the command has finished, you

hear intermittent beeps indicating that
the system is in the command waiting
mode. You may enter another
command at this time from the chart
above.

6. When you are finished, hang up to exit

the system. The answering system
automatically returns to standby.

Command

Function

0 then 1 Repeat a Message

0 then 2 Playing incoming Messages
0 then 3 Skipping a Message
0 then 4 Deleting a Message
0 then 5 Stop Operation

0 then 6 Answering System On
0 then 7 Memo Record/Stop

0 then 8 Greeting Message Record/Stop

0 then 9 Answer System Off
1 then 0 Help Guidance

NOTES

• For Repeat a Message

function, press 0 then 1
within about four
seconds to repeat the
previous message, or
press 0 then 1 after
about four seconds to
repeat the current
message.

• For Memo Record and

Greeting Message
Record function, the first
time you enter the
corresponding
command, it starts the
Recording function. If
you want to stop the
recording, press 0 then 7
or 8, or 0 then 5.