Radio Shack 43-3704 - Manual (Page 25)

Setting Menu Options
25
3. Press CID/VOL/ or REDIAL/P/ to
select Ring Time submenu, and then
the
OK soft key.
4. Press CID/VOL/ or REDIAL/P/ to
select a Ring Time (Toll Saver, 2 Times,
4 Times, or 6 Times).
5. Press the OK soft key. You will hear a
confirmation tone.
Setting the Record Time
Record Time sets the duration for recording
the incoming messages. You have three
record time options. The options “one
minute” or “four minutes” set the duration for
recording the incoming messages.
“Announce only” answers the call but
prevents the caller from leaving a message.
1. Press the MENU soft key. Select the
Answ. Setup menu.
2. Press CID/VOL/ or REDIAL/P/ to
select Line1 or Line2 , and then the OK
soft key.
3. Press CID/VOL/ or REDIAL/P/ to
select Record Time submenu, and then
the
OK soft key.
4. Press CID/VOL/ or REDIAL/P/ to
select Record Time (1 Minute, 4
Minutes, or Announce Only).
5. Press the OK soft key. You will hear a
confirmation tone.
Setting the Message Alert On or Off
Message Alert sounds an alert tone when
you have an unheard message. If you set
the Message Alert on, whenever a new
message is received, the soft alert tone will
sound every 15 seconds.