Radio Shack 43-3704 - Manual (Page 62)

The
Integrat
ed Answ
ering Device
62
Setting the call screen
You can screen calls when the Call Screen
function is set to On. Ô
1. Press L1 ANSWER or L2 ANSWER .
2. Press CLOCK/MENU six times.
The current Call Screen setting ( On or
OF ) appears on the base and it is
announced.
3. Press SKIP/SELECT or
REPEAT/SELECT to choose On or
OF .
4. Press SET . A confirmation tone sounds,
and the system announces the new
setting.
Screening a call
From the base
To screen an incoming call, do the steps as
follows:
1. After the answering system answers,
the base speaker will let you hear the
calls as the machine records the
message. To adjust the volume, press
RING/VOL/ or RING/VOL/ . If you set
the answering system to Off, you
cannot screen a call.
To mute the call screen temporarily,
press
! PLAY/ " STOP when the system
is answering.
To resume the call screen, press RING/
VOL/ or RING/VOL/ .
2. To answer the call, press TALK/FLASH ,
SPEAKER . The answering system will
disconnect automatically.
Ô
NOTE
Ô
If you mute the ringer, you
can not screen the call.