Radio Shack 43-3704 User Manual

Page 48

Caller

“Viewing the Caller ID List” on
page 46).

2. Press

TALK/FLASH

SPEAKER

. The

phone will automatically select a free
line. To select a particular line, press
the

LINE1

LINE2

soft key. The

displayed phone number dials
automatically.

Long Distance calls and Area Code

Setting/Cancellation
While the present Caller ID information is

displayed, pressing

/TONE/<

will place or

remove the prefix “1” in the display to set

the call for a long distance call, or pressing

#/>

will set or cancel an area code (see

“Setting the Area Code” on page 28). Ô
Storing Caller ID messages in the

Phonebook
Messages shown in the Caller ID list can be

stored in the phonebook. The phone

number and name of the party on the Caller

ID list can be stored in memory. Ô

1. When the phone is in standby mode,

view the Caller ID message to be
stored.
Then press the

EDIT

soft key.

2. Press

CID/VOL/

REDIAL/P/

select

Store into PB?

, and the

soft key. If the Caller ID message is
already stored in memory, you will hear
a beep and

This data is already

stored!!

appears. The number will

not be stored.

3. To complete the setting, follow the

steps 3-8 in “Storing Phone Numbers,
Names, Distinctive Rings, and Speed
Dial” on page 38-39.

NOTES

• When a long distance

call has been set,

appears in the display.

• If a call comes in via a

telephone system that
does not offer Caller ID
service, no information is
stored.

• If the Caller ID message

was received as a
private/unknown
number, or the message
does not have the
number, you cannot
store the message in the
Phonebook. If it was
received as private/
unknown name, the
message will be stored
as .

• Even if the 100 memory

locations are full, the
message will be stored
in the Phonebook.
However, the message
will be erased from the
Caller ID list.