Radio Shack 43-3704 - Manual (Page 56)

The
Integrat
ed Answ
ering Device
56
1. When the phone is in the standby
mode, press L1 ANSWER or L2
ANSWER .
2. Press and hold OGM .
3. Start your recording after the
announcement “Record greeting”. Ô
The message counter displays “ 30 ”,
then begins to count down.
4. When you have finished recording your
greeting, press OGM , SET , or
!PLAY/ " STOP .
You will hear a confirmation tone and
your recorded greeting plays back for
you.
Choosing between the two
outgoing messages
When the phone is in standby mode, press
L1 ANSWER or L2 ANSWER , and then OGM .
Press OGM again when the outgoing
message is played. Each time OGM is
pressed, the outgoing message is switched
between the pre-recorded and the personal
outgoing message.
Deleting an outgoing message
To delete the personal outgoing message,
press ∅DELETE while the message is
playing. The system announces “Greeting
has been deleted”.
A
DJUSTING THE
S
PEAKER
V
OLUME
L
EVEL
When the base speaker is in use, press
RING/VOL/ or RING/VOL/ on the base to
adjust the volume.
Press
RING/VOL/ for louder or RING/VOL/
for softer. The number 1 -1 0 appears on the
base indicating the volume levels. 1 being
the softest and 10 being the loudest.