Radio Shack 43-3704 - Manual (Page 10)

Installation
10
1. Make the AC adapter and the short
telephone line cord through the hole on
the bracket.
2. Plug one end of the modular cord into
the TEL LINE 1/2 jack on the back of the
base.
3. Insert the supplied AC adapter’s barrel
plug into the DC IN 9V jack on the back
of the base.
4. Slide the bracket into the notches on
the base.
5. Plug the adapter into a standard AC
outlet. Hook the cord on the notch of
the bracket.
6. Plug the telephone line cord into the
telephone outlet.
7. For a wall plate,
align the base’s
keyhole slots
with the wall
plate studs and
slide the base
downward to secure it.
For direct wall
mounting, align
the base’s
keyhole slots with
the mounting
screws and slide
the base downward to secure it.
To remove, push up
a tab on the wall
mount adapter as
shown.