Radio Shack 43-3704 - Manual (Page 66)

The
Integrat
ed Answ
ering Device
66
after the announcement “To delete all
messages, press delete again.”
!
When you try to delete all messages without
first listening to your new messages, you
hear several short beeps followed by an
announcement “Please playback all
messages”.
This protects you from accidentally erasing
messages you have not yet reviewed.
Voice memo
The voice memo function allows the user to
record messages (more than two seconds
and within four minutes). Ô
1. Press L1 ANSWER or L2 ANSWER .
2. Press and hold MEMO/REC . You hear a
beep.
3. Start your recording after the
announcement “Record Memo
Message” and a confirmation tone. The
message counter displays “- -”.
4. When you have finished, press
MEMO/REC , !PLAY/ " STOP , or SET to
stop recording.
The system returns to standby.
Recording a conversation
You can record a conversation from the
handset or the base (more than two
seconds and within ten minutes). Ô
1. During a conversation, press
the MENU soft key on the handset.
2. Press CID/VOL/ or REDIAL/P/ to
select Call Record , and then press
the OK soft key.
Recording a Call appears on the
handset, and “- -” flashes on the base.
Ô
NOTES
Ô
Voice memo
• The voice memo
messages are recorded
as an incoming
messages.
• When the answering
system is full, FL
appears on the display
and recording is
terminated.
• If an outside call is
received during the
operation, the operation
is canceled.
Recording a conversation
• Every state has different
regulations governing
the recording of
conversations over the
telephone. Make sure to
check your local, state
and federal laws before
using this product to
record any telephone
conversation in order to
determine that your use
is in compliance with
such laws or guidelines.
• When the answering
system becomes full, FL
appears on the display
and recording is
terminated.