Radio Shack 43-3704 - Manual (Page 30)

Usin
g Your Phone
30
D
E
-
REGISTER THE
H
ANDSET
Deregister HS clears the handset’s ID from
the main base unit and the base ID from the
handset. You will usually only deregister the
handset if you are having a problem with
your phone.
1. In standby mode, select Deregister HS
in the menu and press the OK soft key.
Deregister HS? appears.
2. Press CID/VOL/ or REDIAL/P/ to
select Yes and then the OK soft key.
When de-registration is complete you
will hear a confirmation tone, and
Deregistration Complete
appears.
3. After de-registering the handset, place
the handset to the base to register. You
must re-register the handset before you
can use it.
USING YOUR PHONE
If you subscribe to two phone lines, those
lines will be completely independent on your
phone. For example, you can have one
handset talking on Line 1 while another
handset talking on Line 2. You must have a
2-line subscription from your phone
company to use the 2-line features. Ô
M
AKING A CALL
From the handset
1. Remove the handset from the base.
2. Press TALK/FLASH . The phone will
automatically select a free line. To
select a particular line, press the
LINE1
or LINE2 soft key.
3. Listen for the dial tone.
Ô
NOTES
Ô
• If the Line 1 is already in
use, the other handset
will display “InUse” with
corresponding line icon.
• To have the phone
select Line1 or Line2
instead of a free line, set
the default telephone
line (see page 18).