Fireplace – Regency G36D User Manual

Page 2

UltraGlow

G36D Zero Clearance Direct Vent Gas Fireplace

To the New Owner:

Congratulations!

You are the owner of a state-of-the-art Gas Fireplace by FIREPLACE PRODUCTS

INTERNATIONAL. The G36D is a hand crafted appliance and has been designed

to provide you with all the warmth and charm of a wood ﬁ replace at the ﬂ ick of a

switch. The model G36D has been approved by Warnock Hersey for both safety and

efﬁ ciency. As it also bears our own mark, it promises to provide you with economy,

comfort and security for many trouble free years to follow. Please take a moment now

to acquaint yourself with these instructions and the many features of your Regency

Fireplace.

INFORMATION FOR MOBILE/MANUFACTURED HOMES AFTER FIRST SALE

This UltraGlow

product has been tested and listed by Warnock Hersey as a Direct Vent Wall Furnace to the following standards: VENTED GAS

FIREPLACE HEATERS ANSI Z21.88-2002/CSA 2.33-2002 and GAS-FIRED APPLIANCES FOR USE AT HIGH ATLITUDES CAN/CGA 2.17-

M91.

This Direct Vent System Appliance must be installed in accordance with the manufacturer's installation instructions and the Manufactured Home

Construction and Safety Standard, Title 24 CFR, Part 3280, or the current Standard of Fire Safety Criteria for Manufactured Home Installations,

Sites, and Communities ANSI/NFPA 501A, and with CAN/CSA Z240-MH Mobile Home Standard in Canada.

This appliance installation must comply with the manufacturer's installation instructions and local codes, if any. In the absence of local codes follow

the current National Fuel Gas Code, ANSI Z223.1 and the current National Electrical Code ANSI/NFPA 70 in the U.S.A., and the current CAN/CGA

B149 Gas Installation Code and the current Canadian Electrical Code CSA C22.1 in Canada.

This UltraGlow

This UltraGlow Mobile/Manufactured Home Listed appliance

comes factory equipped with a means to secure the unit.

This UltraGlow

Mobile/Manufactured Home listed appliance

comes equipped with a dedicated #8 ground lug to which an

18 gauge copper wire from the steel chassis ground must

be attached.