Renesas Emulation Pod for M16C/80 Group MCUs M30803T-RPD-E - Manual (Page 34)

( 32 / 74 )
(3) Replacing the Oscillator Circuit Boards
Figure 3.7 shows how to replace the oscillator circuit boards. For the position of the oscillator circuit
board, see Figure 2.2.
Figure 3.7 Replacing the oscillator circuit boards
(3) Attach the J1 connector of another oscillator circuit board
for replacement to the connector of the MCU-dependent
board.
(4) Secure the oscillator circuit board with the screw.
(1) Unscrew the screw connecting the oscillator circuit board.
(2) Lift off the oscillator circuit board.