Final approach – RCA Satellite System User Manual
Page 67
65
Final Approach
4. Is the bubble centered in the level’s window?
YES
Continue to “Leveling Front-to-Back”.
NO
a) If the bubble is not centered, determine which side of the
mounting foot needs to be raised.
b) Unscrew the lag or machine screws from that side of the
mounting foot.
c)
Place 5/16" washers between the mounting foot and the
mounting surface. Use enough washers to level the
mounting foot.
d) Secure the mounting foot with the lag or machine screws.
Leveling Front-to-Back
1.
Loosen the two bolts securing the mast to the mounting foot
so the mast moves freely.
2.
Place a bubble level on the mast as shown in the figure.
Move the mast so the bubble is centered in the level’s
window.
3.
Tighten the two bolts securing the mast to the mounting
foot.
Add washers
until foot
is level
4
Rotate mast as needed
Adjustment
Level
Not Level
Rotate mast as needed
Adjustment
Level
Not Level
2