RCA Satellite System - Manual (Page 11)

9
Some Indoor Stuff
What’s To Do Indoors?
A fine question. Well, there are a few tasks you need to
accomplish before you can go outside and install the
dish.
First, you’ll connect the DSS ® receiver to your TV. One of
the four connections scenarios shown should match
your system. Then, you’ll work on programming the
remote to control your TV.
Next, you’ll use the on-screen menu system to find out
the dish pointing coordinates for your location. These
coordinates, called elevation and azimuth, tell you
where and how high up to point the dish. Finally, you’ll
begin the dish assembly and set the elevation.
➣
Some Indoor Stuff
➣
First Things First
CAUTION
Do not stack electronic components
on top of the DSS
® receiver.
1
2
Some Outdoor Stuff
3
➣➣
➣
Testing the System
Mounting The Mast
Final Approach
4
5
6