RCA Satellite System - Manual (Page 86)

84
Index
A
access card 41, 73
acquiring the satellite signal 37, 71
aiming the dish
using the on-screen signal meter 38
assembling the dish
final assembly 66
audio/video jacks 10
azimuth
setting 39
B
brick surface mounting option
considerations 28, 51
materials and tools needed 51
C
cable, RG-6 coaxial. See RG-6 coaxial cable
cable, routing
considerations 30
into the house 70
through the mast 35, 66
chimney mounting option 58
considerations 29, 58
materials and tools needed 58
cinder block mounting option
considerations 28, 53
materials and tools needed 53
compass
how to use 26
using for the site selection 26
using to aim the dish 37
using to locate the satellite 26
concrete mounting surface option
considerations 28, 51
materials and tools needed 51
connecting
RG-6 coaxial cable to LNB 36
the DSS receiver to TV 10
D
DIRECTV 73
drip loop 68
DSS dish
aiming toward the satellite 37
assembling 8
attaching to the LNB support arm 8
contents of the DSS dish box 7
final assembly 66
grounding 30
mounting options 28, 43
DSS installation
installation overview 4
DSS on-screen signal meter
using to fine-tune the satellite signal 71
DSS receiver
connecting 10
E
elevation
setting 23, 40
F
fine-tuning the satellite signal 71
adjusting the azimuth 72
adjusting the elevation 73
G
grounding the system
cable requirements 30, 67
grounding block 68
house entry point 68
H
help-line (toll-free) 81
L
lap siding mounting option
considerations 28, 47
materials and tools needed 47
use of a spacer 50
LNB
attaching to the LNB support arm 67
connecting the RG-6 coaxial cable 66
M
mast
leveling 64
materials
for final connections 63
mounting on
a chimney 29, 58
a hollow wall 28
a pole 29, 56
a roof 59
brick 28, 51
cinder block 28, 53
lap siding 28, 47
poured concrete 28, 51
wall studs or solid wood 28, 44
mounting options 43