NEC EXPRESS 320Lb-R - Manual (Page 96)

4-14 System Configuration
Peripheral Configuration
Select "Peripheral Configuration" on the Advanced menu to display the following screen.
Phoenix BIOS Setup Utility
Advanced
Peripheral C nfi o guration Item Specific Help
Serial Port A:
Serial Port B: [3F8, IRQ 4]
[2F8, IRQ 3]
Disables serial port 1
or sets the base
address/IRQ of
serial port 1.
F1 Help -/+ C ange Values h
Enter Select Esc Exit
Select Item
enu Select M
F9 Setup Defaults
F10 Save Changes & Exit Sub-Menu
See the table below for setup options on the screen.
IMPORTANT: Make sure to avoid any conflict in the interrupt requests or the base I/O
addresses.
Option Parameter Description Your Setting
Serial Port A
Serial Port B Disabled
3F8, IRQ 3
[3F8, IRQ 4]
*1
[2F8, IRQ 3]
*2
2F8, IRQ 4
3E8, IRQ 3
3E8, IRQ 4
2E8, IRQ 3
2E8, IRQ4
Auto
Enable or disable the serial port A and
B, or specify a base address and
interrupt.
*1 Factory setting for the serial port A
*2 Factory setting for the serial port B
[ ]: Factory-set