Procedure in the ft server utility, Start, Stop – NEC EXPRESS 320Lb-R User Manual
Page 167: Sample screen of ft server utility, Check and clear of mtbf information
Installing and Using Utilities 5-41
Procedure in the ft server utility
Start
1.
Select the target component from the main window of the ft server utility.
The screen of the target component appears.
2.
Check the current state of the target component with the LEDs.
3.
Click the [Up] button of the target component.
A certain time is required for the start.
The start result can be confirmed by the LEDs on the target component. The result of the
start operation is registered in the syslog.
Stop
Stop before replacing components.
1.
Select the target component from the main window of the ft server utility.
The screen of the target component appears.
2.
Check the current state of the target component with the LEDs.
3.
Click the [Down] button of the target component.
A certain time is required for the start.
The start result can be confirmed by the LEDs on the target component. The result of the
start operation is registered in the syslog.
Sample screen of ft server utility
[CPU] module screen
Main window