NEC EXPRESS 320Lb-R - Manual (Page 103)

System Configuration 4-21
System Hardware
Move the cursor onto "System Hardware" to display the System Hardware menu.
To make a selection for "Thermal Sensor", "Wake On Event", "Console Redirection" and
"ftMemory", first select a desired option and press Enter to display its submenu.
See the table below for setup options on the screen.
Option Parameter Description Your Setting
AC LINK Stay Off
[Last State]
Power On Specify the AC LINK feature by selecting the
status of the power supply unit of the server
when the AC power supply restarts. (See the
table on the next page for details.)
Waiting time
for AC-LINK [0], 10 - 3600 Set maximum waiting time in second for
AC-LINK. If either of ACs is not supplied in
time, the system will be turned on as simplex
config. Value 0 means the system waits
eternally.
Range [0 or 10-3600sec.]
Error Log
Initialization Enter Press Enter to initialize the error log. The
message "Error Log Cleared" appears upon
successful completion. If failed, the message
"Error Log Not Cleared!" appears.
[ ]: Factory-set