NEC EXPRESS 320Lb-R - Manual (Page 184)

5-58 Installing and Using Utilities
6. [Configuration for ft Series] dialog box, specify/register configuration information
including the names of computers to be managed, and then write the information to FD as
the following filename:
CSL_LESS.CFG
The setting items of the server are as follows:
Computer Name (The managed server name. Arbitrary)
IP address
Subnet mask
Default gateway
Primary contact (Management PC’s IP address)
7. Right-clicking the server name to open the pop-up menu, from which select [Property]
command to open [Property] dialog box.
8. When the [Property] dialog box appears: specify the items as follows:
<[ID] page>
Connection mode: LAN
<[Alert notification] page>
Uncheck [Use Default Settings] and
check [Reset] of [Activate].
9. Right-clicking the server name to
open the pop-up menu and select
[Open Remote Console] to open
[MWA Remote Console].
10. Select the [Action at Remote Console
Connect] command from the popup
menu displayed by right-clicking the server window to display the [Action at Remote
Console Connect] dialog box. Then select [Go MWA mode].
11. Insert NEC EXPRESSBUILDER CD-ROM into the drive of the computer to be managed
and insert floppy disk storing the configuration information (CSL_LESS.CFG) into the
FDD drive.
12. Hook up the management PC to LAN.