NEC EXPRESS 320Lb-R - Manual (Page 112)

4-30 System Configuration
Start Procedure
Start Fast!UTIL in the procedure below:
1. Turn on the power of the server.
The start message appears on a screen in the middle of POST.
2. Press Q and Ctrl together.
Fast!UTIL is started.
IMPORTANT: Press these keys before message "QLogic Adapter using IRQ
number x" or later appears.
QLogic Corporation
QLA 1216x PCI SCSI ROM BIOS Version X.XX
Copyright (C) QLogic Corporation 1993-2001 All rights reserved.
www.qlogic.com
Press for Fast!UTIL
ISP12160 Firmware Version xx.xx.xx
QLogic Adapter using IRQ number X
Device Device Adapter SCSI SCSI Vendor Product Product
Number Type Number ID LUN ID ID Revision
81 Disk 0 0 0 SEAGATE ST32550 7394
3. Highlight "Select Host Adapter" using the cursor keys and press Enter.
Configuration Settings
Scan SCSI Bus
SCSI Disk Utility
Select Host Adapter
Exit Fast!UTIL
Fast!UTIL Options