NEC NEAX IPS NWA-008869-001 - Manual (Page 90)

CHAPTER 3 BASICOPERATIONS AND VARIOUS EXPLANATIONS
– 80 – NWA-008869-001 Rev.1.0
atch3001.fm
Changing the In-Skin Router between different config modes
From global config mode to interface or device config mode
To change the In-Skin Router from global config mode to interface or device config mode, specify the in-
terface or device that you want to set up.
From interface or device config mode to global config mode
To change the In-Skin Router from interface or device config mode to global config mode, use the exit
command.
From operation mode to login authentication (logout)
To log out, use the exit command.
Router (config) # interface Ethernet0.0
Router (config
− Ethernet0.0) #
Enter
Router (config
− Ethernet0.0) # exit
Router (config) #
Enter
Router # exit
login :
Enter
MODES