NEC NEAX IPS NWA-008869-001 - Manual (Page 88)

CHAPTER 3 BASICOPERATIONS AND VARIOUS EXPLANATIONS
– 78 – NWA-008869-001 Rev.1.0
atch3001.fm
MODES
Mode configuration
The In-Skin Router provides operation mode and config mode. Config mode is divided into the following
three modes.
• Operation mode
• Config mode
Global config mode : Mode in which general setup can be performed
Device config mode : Mode in which each port can be set up for a specific physical operation
Interface config mode: Mode in which a physical port can be set up for a specific logical connection
operation
Each command is associated with a specific mode, and can be entered only after the router enters that
mode.
Mode Configuration
The characters "Router" preceding the prompt on the screen is the default setting. If you set a host name using the
hostname command for router identification purposes, "Router" is replaced by this host name.
Indicates the transition assumed when no user is registered
(for example, when the router is just shipped from the factory)
power ON
Self-
diagnosis
Login
authentication
User name
Password
exit
Operation
mode
Router #
enable - config
[ctrl] + [z]
Global config
mode
Router (config) #
Device config
mode
Router (config-xxxx) #
interface xxxx
exit
exit
device xxxx
Config mode
Interface config
mode
Router (config-xxxx) #
device xxxx
interface xxxx
MODES