Tftp setup for file management – NEC NEAX IPS NWA-008869-001 User Manual
Page 146
CHAPTER 6 MANAGEMENT AND MAINTENANCE
– 136 –
NWA-008869-001 Rev.1.0
atch6001.fm
TFTP SETUP FOR FILE MANAGEMENT
For program file management, file transfer with TFTP is used.
For TFTP file transfer, a TFTP server is required.
If a TFTP program is installed on a terminal (such as a PC or a workstation) connected to the network, and
is started, the terminal can be used as a TFTP server.
On the In-Skin Router, the following two setup operations are required. If the network is available for use,
the operations should have already been performed. To perform the operations now, see
dress and validating the interface”
in Chapter 4.
• Set an IP address
• Validate the interface
MEMO:
Prepare a TFTP program that can be used on the remote console terminal used.
TFTP SETUP FOR FILE MANAGEMENT