beautypg.com

NEC NEAX IPS NWA-008869-001 User Manual

Page 157

background image

CHAPTER 6 MANAGEMENT AND MAINTENANCE

– 147 –

NWA-008869-001 Rev.1.0

atch6001.fm

Setting the type of trap to be sent
By default, the In-Skin Router sends all traps. To prevent the In-Skin Router from sending a specific trap,
use the no snmp-agent trap command.

In this example, the In-Skin Router is prohibited to send the “link-up” trap.

Starting an SNMP agent
Start an SNMP agent.

Checking the settings
Use the show running-config command to check the settings.
Check also that MIB is obtainable from the SNMP manager and that traps have been sent normally.

Saving the settings
Use the write memory command to save the settings as startup config.

Router (config) # no snmp

− agent trap private snmp link − up

Router (config) #

Enter

Router (config) # snmp

− agent ip enable

Router (config) #

Enter

MANAGEMENT WITH SNMP