NEC NEAX IPS NWA-008869-001 - Manual (Page 126)

CHAPTER 5 EXAMPLES OF SETUP ON NETWORKS
– 116 – NWA-008869-001 Rev.1.0
atch5001.fm
ROUTING SETUP EXAMPLES (IPv4)
The In-Skin Router supports both static routing and dynamic routing. For dynamic routing, it supports RIP,
RIPv2 (IPv4), and RIPng (IPv6).
Using the following IPv4 network, this section explains basic routing setup. In this example, the routing
setup required for terminal A to gain access to terminal B is explained.
The setup includes the following operations:
(1) Set a static route
(2) Set RIP and RIPv2
(3) Check the communication state
Routing Setup Examples (IPv4)
LAN1
LAN2
CONSOLE 192.168.3.100
Network A Network B
Router A
Local console
Terminal B
192.168.1.5
192.168.3.0/24 192.168.1.0/24
LAN1=10/100BASE-TX (FastEthernet)
LAN2=10BASE-T (Ethernet)
Terminal A
192.168.2.2
192.168.2.1
192.168.3.1
192.168.1.1
Network C
192.168.2.0/24
In-Skin Router
2000 IPS
ROUTING SETUP EXAMPLES (IPv4)