NEC NEAX IPS NWA-008869-001 - Manual (Page 134)

CHAPTER 5 EXAMPLES OF SETUP ON NETWORKS
– 124 – NWA-008869-001 Rev.1.0
atch5001.fm
PPPoE SETUP EXAMPLE
As a protocol for connecting to those carriers that offer broadband services such as ADSL and optical fiber
services, the PPPoE protocol for establishing a PPP connection to any of these carriers via a LAN port is
available.
This section explains an example of establishing a terminal-type connection to a provider with the PPPoE
protocol.
The setup includes the following operations:
(1) Set PPPoE
(2) Set the route
(3) Set the terminal-side network
(4) Set the DNS server
PPPoE Setup Example
LAN1
LAN2
CONSOLE The address is
acquired by IPCP.
Local console
LAN1=10/100BASE-TX (FastEthernet)
LAN2=10BASE-T (Ethernet)
Terminal A
192.168.1.2
192.168.1.1
Network A
192.168.1.0/24
ADSL
modem
Carrier
network
(provider)
In-Skin Router
2000 IPS
PPPoE SETUP EXAMPLE