Nortel Networks Server 600r - Manual (Page 45)

45
Chapter 6
EMC emission level protection for the
600r server
To lower the EMC emission level, ferrite cores are installed with one loop on
the following external cables:
• Ferrite Core (TDK and part number ZCAT3035-1330) for the triple
DS30X I/O cable (Nortel and part number NTRH2014E6), at each end
of the cable.
CAUTION
The ferrite cores are preinstalled on the provided cable. It is not
your responsibility to attach these ferrite cores to these cables.
However, you must ensure that these ferrites are in place to keep
the EMC emission levels low.
Nortel CallPilot
600r Server Hardware Installation
NN44200-307 01.03 Standard
5.0 14 May 2008
Copyright © 2007-2008, Nortel Networks
.