Nortel Networks Server 600r - Manual (Page 21)

21
Chapter 3
Preparing for installation
In this Chapter
"Installation overview" (page 21)
"Unpacking the 600r server" (page 23)
"Inspecting the interior of server" (page 24)
Installation overview
Introduction
This section provides an overview of the steps required to install the 600r
server and peripheral devices. For detailed instructions, see
Chapter 4
"Installing the server and peripheral devices" (page 27)
When you are finished, continue with the switch and server setup as
described in the documentation for your switch:
• Communication Server 1000 and CallPilot Server Configuration
(NN44200-312)
• Meridian 1 and CallPilot Server Configuration (NN44200-302)
Installation checklist
Step Description Check
1 Review the "Installing the CallPilot server" section in the
Installation and Configuration Task List (NN44200-306),
and complete stage 1 of the Installation checklist. __
Nortel CallPilot
600r Server Hardware Installation
NN44200-307 01.03 Standard
5.0 14 May 2008
Copyright © 2007-2008, Nortel Networks
.