Nortel Networks Server 600r - Manual (Page 27)

27
Chapter 4
Installing the server and peripheral
devices
In this chapter
"Installing the server" (page 27)
"Connecting peripherals to the server" (page 28)
"Connecting the server to the ELAN subnet" (page 32)
"Connecting the server to the Nortel server subnet (optional)" (page 33)
"Installing the Nortel software feature dongle" (page 34)
Installing the server
Before you install the 600r server, ensure that the chosen location meets
the requirements identified in the Site inspection checklist provided in the
Installation and Configuration Task List (NN44200-306).
Note: The 600r server is supplied with industry standard 48.3 cm (19
in.) rack rails that can accommodate racks with a maximum depth of 61
cm (24 in.) between the mounting posts. Check the rack you are using
and ensure that the Nortel supplied server rack rails are suitable for your
specific installation requirements. For depths greater than 61 cm (24
in.), Nortel recommends that you purchase a third-party rack shelf that
can safely hold up to 23 kg (50 lb.)
Nortel CallPilot
600r Server Hardware Installation
NN44200-307 01.03 Standard
5.0 14 May 2008
Copyright © 2007-2008, Nortel Networks
.