Nikon D60 - Manual (Page 66)

54
Chang
ing Shooting Settings
Releasing the Shutter
Release Mode
Select Release mode from the Quick settings display to adjust the setting (A 48).
E
04 — Release Mode
Release mode also can be set in the custom settings menu (A 109).
F
11 — F/G Button (A 112)
At default settings, self-timer mode can be applied by simply pressing F/G. The
release mode can be changed by holding down F/G and rotating the command
dial if Release mode is selected for Custom Setting 11 (F/G button; A 112).
Continuous Mode
1
Highlight Release mode in the Quick settings display
(A 48) and highlight b (Continuous).
2
Shoot.
Photographs are shot continuously while the shutter-release button is held
down.
a Single frame (default setting)
Camera shoots one photograph each time the shutter-release button is pressed.
b Continuous (burst mode) A 54
Camera records photographs at up to about three frames per second while the
shutter-release button is pressed. The fastest frame rates can be achieved by
choosing manual focus (A 61), rotating the mode dial to b or d and selecting a
shutter speed of
1
/ 250 s or faster (A 42, 44), and using defaults for all other settings.
c Self-timer A 55
Use for self-portraits or to reduce blurring caused by camera shake. Shutter is
released about ten seconds after the shutter-release button is pressed.
d Delayed remote A 55
Optional Wireless Remote Control ML-L3 required. Use for self-portraits. Shutter is
released about two seconds after the shutter-release button on the remote control
is pressed.
e Quick-response remote A 55
Optional Wireless Remote Control ML-L3 required. Use to reduce blurring caused
by camera shake. Shutter is released immediately after the shutter-release button
on the remote control is pressed.
Release mode
Move OK