Nikon D60 - Manual (Page 193)

181
Specifications
Technical
Notes
Lens
Compatible lenses
• AF-S and AF-I NIKKOR: All functions supported
• Type G or D AF NIKKOR not equipped with an autofocus
motor: All functions supported except autofocus.
• Non-Type G or D AF NIKKOR not equipped with an autofocus
motor: All functions supported except 3D color matrix metering II
and autofocus.
• IX-NIKKOR and AF-NIKKOR for F3AF: Not supported.
• Type D PC NIKKOR: All functions supported except some
shooting modes.
• AI-P NIKKOR: All functions supported except 3D color matrix
metering II
• Non-CPU: Autofocus not supported. Can be used in exposure
mode d, but exposure meter does not function.
• Lens with maximum aperture of f/5.6 or faster: Electronic
rangefinder can be used.
Shutter
Type Electronically-controlled vertical-travel focal-plane shutter
Speed
1
/ 4000 -30 s in steps of
1
/ 3 EV, Bulb, Time (optional Wireless Remote
Control ML-L3 required)
Flash sync speed X=
1
/ 200 s; synchronizes with shutter at
1
/ 200 s or slower
Release
Release mode
Single frame, Continuous
Self-timer, Remote control (optional Wireless Remote Control ML-L3
required)
Frame advance rate
Up to 3 fps (by selecting Manual focus mode, rotating the mode
dial to Shutter-priority auto or Manual mode, selecting a shutter
speed of
1
/ 250 s or faster, and using defaults for all other settings).
Self-timer Can be selected from 2, 5, 10, and 20 s duration
Exposure
Metering TTL exposure metering using 420-segment RGB sensor
Metering method
• Matrix: 3D color matrix metering II (type G and D lenses); color
matrix metering II (other CPU lenses)
• Center-weighted: Weight of 75 % given to 8-mm circle in center
of frame
• Spot: Meters 3.5-mm circle (about 2.5 % of frame) centered on
selected focus point (on center focus point when non-CPU lens is
used)
Range (ISO 100, f/1.4
lens, 20°C/68°F)
• Matrix or center-weighted metering: 0–20 EV
• Spot metering: 2–20 EV
Exposure meter
coupling
Combined CPU