NEC SILENTWRIT 1700 Series User Manual
Page 132
5–44
1765 Network Printer Configuration Guide
TCP/IP Parameters Dialog Box
Select the TCP/IP button in the Printer Administration
window or select the TCP/IP menu option from the
Configure menu to open the TCP/IP Parameters dialog
box. The TCP/IP Parameters dialog box allows you to
view and modify the IP address and subnet mask.
IP Address:
Enter the new IP address in this text
entry box.
Subnet Mask:
Enter the new subnet mask in this text
entry box.
Auto IP Address:
If Auto IP is on, you can use the
UNIX commands
arp
and
ping
to change the LAN
card's IP address.
Arp
is a host command which
displays or modifies the host's ARP entry table to
assign a MAC address to a known IP address.
Follow these steps to set Auto IP to On. For more
information see “Setting TCP/IP Auto IP Address”
on page 5-34.
note:
If your network does not support ARP,
changing the Auto IP Address setting has no effect.
Saves changes and closes dialog box
Discards changes and closes dialog box
Opens online help about this dialog box