Nortel Networks Passport 4400 - Manual (Page 86)

Analog Voice Modules Passport 4400 Hardware Installation Manual
8-8
Country-specific Strap Settings
France
• Locate the strapping block labeled E6/E7. Place the strap over the pins
marked E6.
• Locate the strapping block labeled E13/E14. Place the strap over the pins
marked E13.
• Leave other strapping blocks (E8/E9, E10/E11, E15/E16) in their default
positions.
Figure 8-9. Strapping the European FXO Module - France
Caution: !
The following figures give specific instructions on strapping the
FXO Interface Module for use in Spain, France, Germany and
Switzerland. The module is factory shipped with a default setting
that operates correctly in all other countries. If this module is
NOT to be used in one of the countries listed above, do not adjust
the straps.
E16* E10*
E6
E13
E9*
*Default setting
Jumper in
Jumper out