Nortel Networks Server 1005r - Manual (Page 41)

41
Chapter 5
Connecting the server to power
In this chapter
• "Safety precautions" (page 41)
• "Locating the power supply modules" (page 41)
• "About the power supply module" (page 42)
• "Connecting the server to power" (page 42)
Safety precautions
Equipment handling guidelines
External power equipment, such as an uninterruptible power supply (UPS),
is usually very heavy. This equipment requires special handling procedures
and additional personnel for unloading and installation. Be aware of weight
distribution, and prevent the equipment room floor from being overly
stressed.
Safety information
DANGER
Risk of electric shock
Procedures involving electrical connections must only be
performed by qualified personnel.
Ensure that you obey all displayed warning notices on power
equipment and connections.
Locating the power supply modules
Introduction
Both AC power supply modules are installed prior to shipping. The following
diagram shows the location of the power supply modules in the rear panel
(D and E):
Nortel CallPilot
1005r Server Hardware Installation
NN44200-308 01.06 Standard
5.0 15 May 2008
Copyright © 2006-2008, Nortel Networks
.