Nortel Networks Server 1005r - Manual (Page 37)

Installing the Nortel software feature dongle 37
What is next?
Continue with "Installing the Nortel software feature dongle" (page 37) .
Installing the Nortel software feature dongle
Introduction
The software feature key is a security device that stores the unique serial
number of the server. The feature key is embedded in the Nortel software
feature dongle, which plugs into USB port 0 on the rear panel.
Note: Only one dongle is shipped with a pair of High Availability
servers. It doesn’t matter which server you install the dongle in until
you configure the servers later on.
The following diagram shows the dongle plugged into the back panel of the
server:
Dongle installed on the server.
To install the software feature dongle
Step Action
1 Ensure that there is nothing plugged into USB port 0 on the rear
panel.
2 If the software feature key is not preinstalled in the dongle, insert
it into the software feature slot on the dongle. Insert the software
Nortel CallPilot
1005r Server Hardware Installation
NN44200-308 01.06 Standard
5.0 15 May 2008
Copyright © 2006-2008, Nortel Networks
.