Nortel Networks NN10265-111 User Manual
Page 91
MCS 5100 RTP Media Portal Basics
91
Copyright © Nortel Networks Limited 2006
Figure 38 BIOS Setup Utility screen
3
From the Advanced menu, move to IDE Configuration and
press Enter.
4
Verify, or change, the values on screen to match the values listed
below. Leave all other values as default.
Local Bus IDE adapter: [Disabled]
Large Disk Access Mode: [DOS]
SMART Device Monitoring: [Disabled]
Primary Master: [NONE]
Primary Slave: [NONE]
Secondary Master: [NONE]
Secondary Slave: [NONE]
5
Press Esc twice to return to the Advanced menu.
6
Move to PCI Configuration and press Enter.
7
Verify, or change, the values on screen to match the values listed
below.
Default Primary Video Adapter: [AGP]
On-Card Ethernet 1: [Enabled]
Ethernet 1 Connection: [Rear]
Ethernet 1 Option ROM: [Disabled]
On-Card Ethernet 2: [Enabled]
Ethernet 2 Connection: [Rear]
Ethernet 2 Option ROM: [Disabled]
8
Move to the HA configuration sub-menu and press Enter.
BIOS Setup Utility
Main
Memory Advanced Security Status Boot Exit
BIOS Version CPV5501 1.0RM01
Board Version 01-R5347P09A
Board Serial No. 9975639
CPU Type Pentium (R) III
CPU Speed 700 MHz
Cache RAM 256 KB
Total Memory 512 KB
System Time: [09:59:07]
System Date: [09/17/2003]
Item Specific Help
__________________