Upgrade the rtp media portal component, Delete the previous load of, R to – Nortel Networks NN10265-111 User Manual
Page 30: Upgrade the rtp

NN10265-111 MCS 5100 3.5 Standard 4.0 January 2006
30
Copyright © Nortel Networks Limited 2006
Figure 16 RTP Portal Shutdown confirmation
4
The RTP Media Portal component shuts down gracefully and
eventually goes into a LOCKED state when the last active media
session ends (as seen in the General Information Area of the
System Management Console).
Delete the previous load of the RTP Media Portal component
The following procedure describes how to delete the previous load of
the RTP Media Portal component.
From the System Management Console
1
In the system tree, right-click on the target RTP Media Portal
component.
2
From the pop-up menu, select the Delete command.
This command removes the previous load, preventing problems
that might occur if an older build is brought into service on top of
a newer one.
Upgrade the RTP Media Portal component
The following procedure describes how to upgrade the RTP Media
Portal load. Use Terminal Server access, or the main console with
keyboard and monitor attached.
From a terminal window
1
Log in as root on the target RTP Media Portal.
2
Insert the upgrade CD into the associated CD-ROM.
3
Mount the CD.
mount /dev/cdrom
mnt/cdrom
4
Change directory to the top-level directory on the CD.
cd /mnt/cdrom
5
Run the install script.
./install
6
Change directory.