Nortel Networks NN10265-111 User Manual

Page 54

NN10265-111 MCS 5100 3.5 Standard 4.0 January 2006

Net1 Netmask

Type: IP address

Range: N/A

Default:
255.255.255.0
(Used for the
Media Blades,
not for the host
card.)

The Net1 Netmask is the netmask
used for routing on the network
that is reachable by the NET1
interface on the media card. This
is only used in dual-network
configurations.

Net2 Netmask

Type: IP address

Range: N/A

Default:
255.255.255.0
(Used for the
Media Blades,
not for the host
card.)

The Net2 Netmask is the netmask
used for routing on the network
that is reachable by the NET2
interface on the media card.

Default Gateway

Type: IP Address

Range: N/A

Default: 0.0.0.0
(Used for the
Media Blades,
not for the host
card.)

The Default Gateway is the
gateway router to the rest of the
world (the default route).

Note: If this value is not
configured, the RTP Media Portal
will be unable to provide service.
The RTP Media Portal will only
provide service if the Media
Blades can communicate with the
specified Default Gateway.

Chassis #

Type: String

Range: 0-255

Default: 1

Chassis identifier used to identify
a specific CPX8216T chassis.
This information is used by
configuration scripts to
synchronize RTP Media Portal
configuration across multiple
CX8216T chassis. Must be unique
per chassis. Must match the
Chassis # assigned to the Media
Blades during the staging of the
RTP Media Portal hardware.

Table 2 RTP Media Portal tab configurable properties (Sheet 4 of 8)

Configuration property

Format

Description

(Sheet 4 of 8)