References – Nortel Networks NN10265-111 User Manual
Page 18
NN10265-111 MCS 5100 3.5 Standard 4.0 January 2006
18
Copyright © Nortel Networks Limited 2006
The Rear Transition Module contains two, 10/100 BaseT Ethernet
connections for RTP/RTCP/UDP media streams. Each Media Blade
(pair of MCPN765 and TM-PIMC-0101 cards) performs the following
functions:
•
Connectivity for RTP/RTCP/UDP media streams.
•
Address and Port Discovery (APD) for obscured media endpoints.
•
Relay of media packets between end points.
•
An array of NAT and/or NAPT functions.
The NET ports are used as following:
•
In a single-network deployment, only the NET2 port is used.
•
In dual-network deployment, NET2 is used for connectivity to the
Protected MCS Network and NET1 for the other network.
References
The following are referenced in this document and provide additional
information:
•
MCS 5100 Network Engineering and Deployment, NN10313-191
•
MCS 5100 System Management Console User Guide,
NN10273-111
•
Provisioning Client User Guide, NN42020-105
•
MCS 5100 Fault Management: Alarm and Log Reference,
NN10385-900
•
MCS 5100 Accounting Module Basics, NN10279-111