Nortel Networks NN10265-111 User Manual
Page 76
NN10265-111 MCS 5100 3.5 Standard 4.0 January 2006
76
Copyright © Nortel Networks Limited 2006
Figure 35 Red Hat: Create partition screen
5
Create the second partition. Type n and press Enter to create a
partition. To note the primary partition, type p and press Enter,
then type 2 and press Enter. Press Enter to accept the default
beginning block, and type +5000M and press Enter for the size.
Command (m for help):n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 2
First cylinder (1002-35242, default 1002):
Using default value 1002
Last cylinder or +size or +sizeM or +sizeK
(1002-35242, default 35242): +5000M
6
Create the third partition.Type n and press Enter to create a
partition. To note the primary partition, type p and press Enter,
Command (m for help): p
Disk /tmp/sda: 64 heads, 32 sectors, 35242 sylinders
Units = sylinders of 2048 * 512 bytes
Device Boot Start End Blocks Id System
/tmp/sda1 1 1001 1025008 83 Linux
/tmp/sda2 1002 6002 5121024 83 Linux
/tmp/sda3 6003 7003 1025024 83 Linux swap
/tmp/sda4 7004 35242 28916736 5 Extended
/tmp/sda5 7004 17004 10241008 83 Linux
/tmp/sda6 17005 27005 10241008 83 Linux
/tmp/sda7 27006 35242 8434672 83 Linux
Command (m for help) : d
Partition number (1-7) : 1
Command (m for help) : d
Partition number (1-7) : 2
Command (m for help) : d
Partition number (1-7) : 3
Command (m for help) : d
Partition number (1-7) : 4
Command (m for help) :