Installing the rtp media portal packages – Nortel Networks NN10265-111 User Manual

Page 101

MCS 5100 RTP Media Portal Basics

101

Figure 48 Red Hat: Authentication Configuration screen

Select the software packages to install the following.

•

Networked Workstation

•

NFS Server

•

Anonymous FTP Server

•

Utilities

De-select packages not included in this list. Select OK to
continue.

Select No when asked if a boot disk is to be created.

Select OK to begin the installation. Installation will require
approximately 10 minutes to complete.

Once completed, the system will prompt you to reboot and
remove the installation CD from the CD-ROM.

IMPORTANT: Remove the CD before the POST boot sequence
is complete, otherwise the base installation script will begin
again. If this happens, press the reset button on the front panel
of the Host CPU Card to reboot the system again.

Installing the RTP Media Portal packages

Once the Red Hat installation is complete, the RTP Media Portal and
HA packages can be installed from the second CD.

From the terminal server

After the system reboots, the LILO prompt is displayed. Press
Tab to halt the LILO boot process.

Authentication Configuration

[ *] Use Shadow Passwords

[ *] Enable MD5 Passwords

[ ] Enable NIS
NIS Domain: _________________________
NIS Server: [ ] Request server via broadcast
or use: __________________________

Back