Nortel Networks NN10265-111 User Manual

Page 107

MCS 5100 RTP Media Portal Basics

107

At the prompt, type reset to reboot the network once it
completes the necessary self-tests.

PPC6-Bug>reset

Cold/Warm Reset [C,W] = C?

Execute Local SCSI Bus Reset [Y,N] = N?

Execute Local (CPU) Reset [Y,N] = N? y

Repeat this procedure for all I/O cards in the Domain. The Host
Card IP address and the Broadcast IP address should be the
same between all I/O Cards.

Unplug the console connection from the last I/O card.

Edit the /etc/bladeEtherAddrs file to change the MAC
addresses for each of the new I/O cards in the system. It is only
necessary to change the entries for slots that contain a card. If a
slot is empty, or contains something other than a card, leave the
corresponding entry as is.

vi /etc/bladeEtherAddrs

For example, if the I/O card was added in slot 3, enter the new
MAC addresses on the appropriate line as shown below.

##############################################

#MAC addresses for all blades in the system

#Format: : :

MAC>

##############################################

1:FF00FF00FF00:FF00FF00FF00

2:FF00FF00FF00:FF00FF00FF00

3::

4:FF00FF00FF00:FF00FF00FF00

5:FF00FF00FF00:FF00FF00FF00

6:FF00FF00FF00:FF00FF00FF00

11:0001af04666a:0001af04666b

12:0001af04a022:0001af04a023

13:0001af000709:0001af00070a

14:0001af040390:0001af040391

15::

16::

Save the file and exit the editor.

Exit root.

exit