Nortel Networks NN10265-111 - Manual (Page 23)

MCS 5100 RTP Media Portal Basics
23 Copyright © Nortel Networks Limited 2006
Update the RTP Media Portal component
The following procedure describes how to update a load for the RTP
Media Portal component.
Note: Updates (both upgrades and downgrades) to network
components must be performed in a specific order. Please refer to
MCS 5100Basics (NN10270-100) for further information.
From the System Management Console
1 In the System tree, right-click on the RTP Media Portal
component.
2 From the pop-up menu, select the Update command. This
command may require substantial time to complete execution.
Figure 12 Update from the pop-up menu
You can also launch the update command from the pull-down
Configuration menu.