Network Instruments GigaStor 114ff - Manual (Page 81)

Discover Network Names
Chapter 5 Using Observer with a WAN Probe
81
rev. 1
To set the CIR for a DLCI or group of DLCIs
1 Choose Tools → Discover Network Names. The Discover
Network Names pane opens.
2 In the pane, click the edit DLCI CIR button on the Discover
Network Names mode window (Figure 51).
Figure 51 Edit DCLI
3 Click Add to add a new DLCI.
4 Type the CIR in Kbits/sec for the DLCI.
Figure 52 DLCI Configuration dialog