Network Instruments GigaStor 114ff - Manual (Page 121)

Viewing the Gen2 card’s properties and finding the board’s ID
Chapter 9 Gen2 Capture Card
121
rev. 1
2 In the tree on the left, select Device Manager.
3 In the tree on the right, expand Network Instruments Capture
Adapters (Figure 83).
Figure 83 Computer Management window
4 Choose Network Instruments Gen2 Gigabit Capture Adapter,
right-click and choose Properties. Click the Current State tab
(Figure 84).
Figure 84 Gen2 Card Properties – Current State tab